Wood Protector Waterproofing Sealant Clear

Wood Protector Waterproofing Sealant Clear

A durable, clear waterproofing sealant that allows wood to weather and gray naturally.
Water Proofing Protection:
 
 
Fade Protection:
 
 
Durability:
 
 
Colours: Clear
Uses: Decks, fences, siding, wooden furniture & structures
Details

Warranty

Limited warranty. Lasts up to two (2) years on decks and four (4) years on fences and siding.

Area Preparation

Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic cleaner prior to applying product.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application

Test a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.

Coverage

One gallon covers approximately 150 to 350 sq. feet (13.9 to 32.5 sq. meters) depending on wood texture and porosity.

Area Preparation

Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic cleaner prior to applying product.

Application

Test a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.

Application Temperature

Can be applied down to 10°C (50°F) for 550 g/L VOC version and 2°C (35°F) for 100 g/L VOC version.

Drying Time

Normally dries in 24 hours when applied at 10°(50°F) to 29°C (85°F).

Cleanup

Clean brushes and tools with mineral spirits for 550 g/L VOC version and with soap and water for 100 g/L VOC version.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Benefits
  • Penetrating oil formula for durability and protection
  • Waterproofing protection
  • SunBlock® UV defense
  • Exclusive Scuff Guard® technology
  • Provides a mildew-resistant coating
  • Backed by the Good Housekeeping Seal
A Product of PPG Architectural Finishes, Inc. ©2001 – 2024 PPG Industries. All Rights Reserved. Legal Notices & Privacy Policies | PPG Terms of Use | PPG Architectural Coatings Privacy Policy | Attribution Statement | CA Transparency in Supply Chain Disclosure

Variance in monitor calibrations can affect the on-screen representations of our actual paint and stain colours. Your local Olympic® Stains retailer can match and/or order the exact colour that you desire with the help of the Olympic Stain colour name or number.